尊龙凯时人生就是搏

Contact Us：
+86-028-85255257
sales@f-tone.com

标准光�？�

标准协议光�？�

兼容协议光�？�

其它种类光器件

手艺支持

光�？橹�

SGMII-SFP-2KM光�？�

SGMII-SFP-2KM

0.0/5 rating (0 votes)

Specifications

产品型号: SGMII-SFP-2KM
兼容品牌: 全系列
封装类型: SFP
传输速率: SGMII-SFP-2KM
传输距离: 2KM
发射波长: 1310nm
吸收波长: 1310nm
事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
数字诊断: 带DDM/不带DDM 可选
吸收迅速度: 2KM
吸收迅速度: 2KM

Description

100BASE-FX Spring-Latch SGMII SFP Transceiver

Features

? Build-in PHY supporting SGMII Interface
? Build-in high performance MCU supporting easier configuration
? Support more link status monitor, such as CRC, package counter and Far End Fault Indication (FEFI)
? 100BASE-FX operation
? 1310nm FP laser and PIN photo-detector
? 0.5m~2km transmission with MMF
? Standard serial ID information Compatible with

SFP MSA

? SFP MSA package with duplex LC connector
? With Spring-Latch for high density application
? Very low EMI and excellent ESD protection
? +3.3V single power supply
? Operating case temperature: 0 to +70°C

Applications

? Switch to Switch interface
? Switched backplane applications
? Router/Server interface
? Other optical transmission systems

Standard

? Compatible with SFP MSA
? Compatible with IEEE 802.3-2002
? Compatible with FCC 47 CFR Part 15, Class B
? Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I
? Compatible with Telcordia GR-468-CORE
? RoHS compliance

Description
F-tone SGMII-SFP-2km is designed for 100BASE-FX applications, supporting distance from 0.5m to 2km on MMF with build-in PHY device supporting SGMII interface.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an
input optical signal of receiver.The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities,
standard interfaces, manufacturer and other information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA). F-tone SGMII SFP transceiver product family
supports a range of media (Cat 5 copper, multi-mode fiber, single mode fiber), multi-rate (10/100/1000 Mbps) capabilities. Building-in high performance MCU in this module,
Host can more easily configure all functions of SGMII-SFP-2km. Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic
compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to Flexon
TM regulatory specification and safety guidelines, or contact with F-tone, Inc. America sales office listed at the end of the documentation.

sitemap、网站地图