尊龙凯时人生就是搏

标准光�？�

  2. 首页
  3. 标准光�？�
  4. QSFP-DD光�？�
  5. 200G QSFP-DD SR8 TO 2x100GBASE QSFP28 SR4 Breakout Active Optical Cable

标准协议光�？�

兼容协议光�？�

其它种类光器件

手艺支持

SGMII SFP

SGMII SFP光�？�

3.0/5 rating 1 vote

Specifications

  • 产品型号: FSFP-GSMII-XX
  • 兼容品牌: 全系列
  • 封装类型: SFP
  • 传输速率: 100BASE-FX/1000BASE-X
  • 传输距离: 0~160KM可选
  • 发射波长: 850nm/1310nm/1550nm/BIDI/CWDM/DWDM 可选
  • 吸收波长: 850nm/1310nm/1550nm/BIDI/CWDM/DWDM 可选
  • 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
  • 数字诊断: 带DDM/不带DDM 可选
  • 吸收迅速度: 0~160KM可选
  • 吸收迅速度: 0~160KM可选

Description

100BASE-FX/1000BASE-X SGMII SFP Transceiver

Features

  1. Build-in PHY supporting SGMII Interface
  2. 100BASE-LX/1000BASE-X operation
  3. 1310nm FP laser and PIN photo-detector
  4. 10km transmission with SMF
  5. Standard serial ID information Compatible with SFP MSA
  6. SFP MSA package with duplex LC connector
  7. With Spring-Latch for high density application
  8. Very low EMI and excellent ESD protection
  9. +3.3V single power supply
  10. Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)

Applications

  1. Switch to Switch interface
  2. Switched backplane applications
  3. Router/Server interface
  4. Other optical transmission systems
  5. 100BASE-FX
  6. 1000BASE-X

Standard

  1. Compatible with SFP MSA
  2. Compatible with IEEE 802.3ah-2004

Description

The SFP transceiver is high performance, cost effective modules. It is designed for 100BASE-LX applications of 10km with SMF. The transceiver consists of two sections: The standard SFP part and the PHY part built with SGMII interface.

The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS(or Link)/Disable/Fault information via I2C register access. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces,  manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA).

订货信息/Ordering information :

If you cannot find the model you are looking for, please, contact with us.

Package Part No. Fiber Type Data Rate Range Wavelength Optical Components Distance Range/Power Budget Connector Case Temperature range MCU
Function		 Application
SGMII SFP FSFP-GSMII-A MMF 100Mbps 850nm VCSEL/PIN 2km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-B MMF 100Mbps 1310nm FP/PIN 2km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-C MMF 100Mbps 1550nm FP/PIN 2km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-MB MMF 100Mbps 1310nm FP/PIN 2km LC Com./Ind. - FE
SGMII SFP EOLS-1503-MC MMF 100Mbps 1550nm FP/PIN 2km LC Com./Ind. - FE
SGMII SFP FSFP-GSMII-E MMF 1000Mbps 1310nm FP/PIN 2km LC Com./Ind. MCU GE
SGMII SFP FSFP-GSMII-F MMF 1000Mbps 1550nm FP/PIN 2km LC Com./Ind. MCU GE
SGMII SFP FSFP-GSMII-G SMF 100Mbps 1310nm FP/PIN 10km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-H SMF 100Mbps 1550nm FP/PIN 10km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-MG SMF 100Mbps 1310nm FP/PIN 10km LC Com./Ind. - FE
SGMII SFP FSFP-GSMII-MH SMF 100Mbps 1550nm FP/PIN 10km LC Com./Ind. - FE
SGMII SFP FSFP-GSMII-I SMF 1000Mbps 1310nm FP/PIN 10km LC Com./Ind. MCU GE
SGMII SFP FSFP-GSMII-J SMF 1000Mbps 1550nm FP/PIN 10km LC Com./Ind. MCU GE

Search

sitemap、网站地图