尊龙凯时人生就是搏

±ê׼ЭÒé¹âÄ £¿é

¼æÈÝЭÒé¹âÄ £¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

AFBR-8422EDZ

AFBR-8422EDZ

0.0/5 rating (0 votes)

Description

AFBR-8422EDZ

尊龙凯时人生就是搏רҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-8422EDZ,Avago AFBR-8422EDZ,°²»ª¸ßAFBR-8422EDZ¹âÄ £¿é,Avago AFBR-8422EDZ¹âÄ £¿é,°²»ª¸ßAFBR-8422EDZ¹âÏËÄ £¿é,Avago AFBR-8422EDZ¹âÏËÄ £¿é,°²»ª¸ßAvago AFBR-8422EDZ¹âÄ £¿é,°²»ª¸ßAvago AFBR-8422EDZ¹âÏËÄ £¿é£¬100%ÍêÉƼæÈÝ°²»ª¸ßAvago AFBR-8422EDZ¹âÄ £¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

Avago Technologies’ AFBR-8422EDZ CFP2 SR10 is a tenchannel pluggable, parallel, fiber optic transceiver for100Gbps Ethernet Applications. The transceiver supportshigh speed serial links over multi-mode fiber at signallingrates up to 103.125 Gb/s (a serial line rate of 10.3125Gb/s per channel) for link distances up to 300 m with OM3fiber or 400 m with OM4 fiber. The product is compliantwith the CFP2 industry agreement for mechanical andlow speed electrical specifications. High speed electricaland optical specifications are compliant with IEEE 802.3baClause 86 for 100GBase-SR10 media, Clause 86A for CPPIelectrical interface and Clause 45 for MDIO.

The transceiver electrical interface uses a 104 contactedge type connector, as specified in the CFP2 industryagreement. The optical interface uses a 24-fiber MTP®(MPO) fiber optic connector. This transceiver incorporatesAvago Technologies' proven integrated circuit and VCSELtechnologies to provide reliable, high performance andconsistent service.

Digital diagnostic monitoring information (DMI) is presentin the AFBR-8422EDZ per the CFP2 industry agreement,providing real time monitoring information of transmitter,receiver and module operating conditions over the MDIO interface.

Features

  • Links up to 300 m using OM3 fiber and 400 m using OM4 fiber
  • CFP2 Power Dissipation Class 2 with CDRs in bypass. CDRs are bypassed for lower power dissipation by default.
  • CFP2 Power Dissipation Class 3 with CDRs ON
  • Proven High Reliability 850 nm technology: Avago VCSEL array transmitter and Avago PIN array receiver
  • Compliant to 100 GbE specifications 802.3ba(100GBase-SR10 and CPPI) up to 300 m OM3 and 400 m OM4 fiber
  • Compliant to 40GbE specifications 802.3ba (40GBaseSR4 and XLPPI) up to 300 m OM3 and 400 m OM4 fiber
  • Compatible with 10GE SR specifications per 802.3ae (10GBASE-SR) up to 300 m OM3 fiber
  • OTU4 Support at 11.18 Gb/s per channel
  • CFP2 10x10Gbit/s Host Pin Map
  • Class 1 eye safe per IEC60825-1 and CDRH
  • Wide case temperature range (0°C to 70°C)
  • Utilizes standard 24 lane optical fiber with MTP® (MPO) optical connector for high density and thin, lightweight cable management
  • Diagnostic features per CFP2 using MDIO. Real time monitoring of:
    • Transmitter average optical power
    • Received average optical power
    • Laser bias current
    • Temperature
    • Supply Voltage
  • Host Lane Loopback (eLoop) and Network LaneLoopback (oLoop) functionality
  • Integrated CDRs on each transmit and receive lane
  • Support CDB (Common Data Block) per CFP MSA MIS Version 2.2[1]
  • CFP Management Interface Specification Version 2.2[1]
  • CFP2 Hardware Specification Revision 1.0[2]
  • Compliant to RoHS directives

 

 

 

 

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ