尊龙凯时人生就是搏

标准协议光� ？�

兼容协议光� ？�

其它种类光器件

手艺支持

AFCT-57G5MZ

AFCT-57G5MZ

0.0/5 rating (0 votes)

Description

AFCT-57G5MZ

尊龙凯时人生就是搏专业研爆发产兼容安华高AFCT-57G5MZ,Avago AFCT-57G5MZ,安华高AFCT-57G5MZ光� ？�,Avago AFCT-57G5MZ光� ？�,安华高AFCT-57G5MZ光纤� ？�,Avago AFCT-57G5MZ光纤� ？�,安华高Avago AFCT-57G5MZ光� ？�,安华高Avago AFCT-57G5MZ光纤� ？�，100%完善兼容安华高Avago AFCT-57G5MZ光� ？�:电气参数兼容，光学参数兼容。

Avago Technologies' AFCT-57G5MZ optical transceiver supports high speed serial links over multi-mode optical fiber at signalling rates up to 28.05 Gb/s (the serial line rate of 32GFC). The product is compliant with Small Form Pluggable industry agreements SFP and SFP+ for mechanical and low speed electrical specifications. High speed electrical and optical specifications are compliant with ANSI Fibre Channel FC-PI-6.

The AFBR-57G5MZ is a multi-rate 850nm transceiver which ensures compliance with FC-PI-6 32GFC, 16GFC and 8GFC specifications. Per the requirements of 32GFC, internal clock and data recovery circuits (CDRs) are present on both electrical input and electrical output of this transceiver. These CDRs will lock at 28.05 Gb/s and 14.025Gb/s (32GFC and 16GFC) but must be bypassed for operation at 8.5 Gb/s (8GFC), accomplished by using two Rate Select inputs to configure transmit and receive sides. Transmitter and receiver can operate at different data rates, as is often seen during Fibre Channel speed negotiation.

Digital diagnostic monitoring information (DMI) is present in the AFBR-57G5MZ per the requirements of SFF-8472, providing real time monitoring information of transceiver laser, receiver and environment conditions over a SFF-8431 2-wire serial interface.

Features

  • Compliant to RoHS directives
  • 1310nm Distributed Feedback Laser (DFB)
  • Class 1 eye safe per IEC60825-1 and CDRH
  • Wide temperature range (0°C to 70°C)
  • LC duplex connector optical interface conforming to

ANSI TIA/EIA604-10 (FOCIS 10A)

  • Diagnostic features per SFF-8472 “Diagnostic Monitoring Interface for Optical Transceivers”
  • Real time monitoring of:
    • Transmitter average optical power
    • Received average optical power
    • Laser bias current
    • Temperature
    • Supply Voltage
  • SFP+ mechanical specifications per SFF-8432
  • Pull Tab delatch mechanism
  • SFP+ compliant low speed interface
  • Fibre Channel FC-PI-6 compliant high speed interface
    • 3200-M5-SN-S, 1600-M5-SN-S, 800-M5-SN-S
    • 3200-M5E-SN-I, 1600-M5E-SN-I, 800-M5E-SN-I
    • 3200-M5F-SN-I, 1600-M5F-SN-I, 800-M5F-SN-I
  • Fibre Channel FC-PI-6 compliant optical link distances

 

 

 

 

 

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search

sitemap、网站地图