尊龙凯时人生就是搏

±ê×¼¹âÄ £¿é

±ê׼ЭÒé¹âÄ £¿é

¼æÈÝЭÒé¹âÄ £¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

100G-QSFP28-102

100G-QSFP28-102

0.0/5 rating (0 votes)

Description

Product Description
100G-QSFP28-102 is Low Power (≤2W) Multi-Vendor MSA Compatible 100GBASE-SR4 QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver designed for operation over multi-mode optical fiber. Module has minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach 100 m over OM4 multi-mode fiber, or 70 m over OM3 multi-mode fiber. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G-QSFP28-102 uses 25Gb/s VSCEL (Vertical Cavity Surface Emitting Laser) (850 nm) transmitters and 25Gb/s PIN photodiode receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 100G-QSFP28-102 operates in standard 0°-70°C temperature range and has MTP/MPO connector. 100GBASE-SR4 QSFP28 Low Power module support up to 103.125 Gbps data rate and such applications as 100G Ethernet (103.125 Gbps). 100G-QSFP28-102 optical transceiver is multi-purpose module which can be used in various scenarios in today’s networking environment. Most popular applications are Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks.

Key Technical Data
Media Type:

4 Lanes of MMF

Connectors:

MTP/MPO

TX Wavelength:

850 nm.

RX Wavelenght:

850 nm.

Minimum Optical Budget:

1.9 dB

Maximum Distance:

100m

Supported Data Rate:

103.125 Gbps

Supported Applications:

100G Ethernet (103.125Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Not Supported

Transmitter Type:

VSCEL Laser

Tx Wavelength Bandwidth:

20 nm (840-860 nm)

Average Launch Power (Min) Each Lane:

-8.4 dBm

Average Launch Power (Max) Each Lane:

2.4 dBm

Extinction Ratio (Min):

3 dB

Receiver Type:

PIN photodiode

Rx Wavelength Bandwidth:

20 nm (840-860 nm)

Average Receiver Sensitivity (Min) Each Lane:

-10.3 dBm

Average Receiver Sensitivity (Max) Each Lane:

2.4 dBm

Receiver Overload:

2.4 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤2W

Power:

+3.3V

Chipset:

Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV

Compliance:

Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE 802.3bm 100GBASE-SR4, RoHS-6, CE, QSFP28 MSA, SFF-8636, SFF-8665

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ