+86-028-85255257
Product Description
100G-QSFP28-100 is Multi-Vendor MSA Compatible 100GBASE-SR4 QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver designed for operation over multi-mode optical fiber. Module has minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach 100 m over OM4 multi-mode fiber, or 70 m over OM3 multi-mode fiber. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G-QSFP28-100 uses 25Gb/s VSCEL (Vertical Cavity Surface Emitting Laser) (850 nm) transmitters and 25Gb/s PIN photodiode receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 100G-QSFP28-100 operates in standard 0°-70°C temperature range and has MTP/MPO connector. 100GBASE-SR4 QSFP28 support up to 103.125 Gbps data rate and such applications as 100G Ethernet (103.125 Gbps). 100G-QSFP28-100 optical transceiver is multi-purpose module which can be used in various scenarios in today’s networking environment. Most popular applications are Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks.
Media Type: |
4 Lanes of MMF |
---|---|
Connectors: |
MTP/MPO |
TX Wavelength: |
850 nm. |
RX Wavelenght: |
850 nm. |
Minimum Optical Budget: |
1.9 dB |
Maximum Distance: |
100m |
Supported Data Rate: |
103.125 Gbps |
Supported Applications: |
100G Ethernet (103.125Gbps) |
DDM/DOM: |
Supported |
CDR (Clock and Data Recovery) chip |
Supported |
Forward Error Correction (FEC): |
Not Supported |
Transmitter Type: |
VSCEL Laser |
Tx Wavelength Bandwidth: |
20 nm (840-860 nm) |
Average Launch Power (Min) Each Lane: |
-8.4 dBm |
Average Launch Power (Max) Each Lane: |
2.4 dBm |
Extinction Ratio (Min): |
3 dB |
Receiver Type: |
PIN photodiode |
Rx Wavelength Bandwidth: |
20 nm (840-860 nm) |
Average Receiver Sensitivity (Min) Each Lane: |
-10.3 dBm |
Average Receiver Sensitivity (Max) Each Lane: |
2.4 dBm |
Receiver Overload: |
3.4 dBm |
Temperature Range: |
Standard 0°-70°C |
Storage Temperature: |
-40° to 85°C |
Relative Humidity: |
0 to 85% |
Power Consumption: |
≤3.5W |
Power: |
+3.3V |
Chipset: |
Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV |
Compliance: |
Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, RoHS-6, 802.3bm 100GBASE-SR4, CE, QSFP28 MSA, SFF-8636, SFF-8665 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.