尊龙凯时人生就是搏

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

400G-QSFP-DD-40

400G-QSFP-DD-40

0.0/5 rating (0 votes)

Description

Product Description
400G-QSFP-DD-40 is a 400GBASE-ER4 Lite Multi-Vendor MSA Compatible QSFP-DD (Quad Small Form-Factor Pluggable – Double Density) Transceiver designed for operation over Double Fiber Single-Mode Fiber (SMF) optical cable. On the transmission side module converts 8x 50G 400GAUI-8 PAM4 (Pulse-Amplitude Modulation) electrical input channels (each 53.125Gbps) into 4 Single Lambda 100G PAM4 LAN-WDM optical signals. Reversely the opposite is done on the receiving side, module converts 4 Single Lambda 100G PAM4 CWDM optical signals into 8x 50G 400GAUI-8 electrical inputs. Module has minimum guaranteed optical budget of 18 dB, which in most cases is enough to reach 30km with 400G KP4 FEC and 40 km distance with built-in PFEC over OS2 single-mode fiber. However, distance is just indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. 400G-QSFP-DD-40 uses top quality Quad channel EML driver and 4 LAN WDM EML lasers together with an optical multiplexer (4 LAN WDM lines: 1295.56, 1300.05, 1304.58 and 1309.14 nm) transmitter and 400Gb/s APD array receiver. 400G-QSFP-DD-40 400GBASE- ER4 Lite supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. 400G-QSFP-DD-40 operates in Standard 0°-70°C temperature range and has Double LC interface.
400G-QSFP-DD-40 400GBASE-ER4 Lite QSFP-DD support up to 425 Gbps data rate and is designed for 400G Ethernet application. 400G-QSFP-DD-40 QSFP-DD Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular use cases are in Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks. 400G-QSFP-DD-40 400GBASE-ER4 Lite QSFP-DD transceiver is CE/RoHS certified and is compliant with product safety standards.

Key Technical Data
Media Type:

Single-Mode Fiber (SMF.)

Connectors:

Double LC

TX Wavelength:

LAN WDM 1310nm

RX Wavelenght:

LAN WDM 1310nm

Minimum Optical Budget:

18 dB

Maximum Distance:

40km

Supported Data Rate:

425 Gbps

Supported Applications:

400G Ethernet (412.5Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

EML Laser

Tx Wavelength Bandwidth:

4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm)

Average Launch Power (Min) Each Lane:

0.4 dBm

Average Launch Power (Max) Each Lane:

6.5 dBm

Extinction Ratio (Min):

6 dB

Receiver Type:

APD Photodiode

Rx Wavelength Bandwidth:

4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm)

Average Receiver Sensitivity (Min) Each Lane:

-15.1 dBm

Receiver Overload:

5.5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤12W

Power:

+3.3V

Chipset:

Inphi

Compliance:

100G Lambda MSA, IEC60825-1 Laser Safety Compliant, IEEE 802.3bs, QSFP-DD MSA, RoHS-6, CE

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ