尊龙凯时人生就是搏

波分复用器

  2. 首页
  3. 波分复用器
  4. AWG DWDM波分复用器
  5. 100G 40/48-CH Gaussian Athermal AWG specification

标准协议光�？�

兼容协议光�？�

其它种类光器件

手艺支持

100G 40/48-CH Gaussian Athermal AWG specification

100G 40/48-CH Gaussian Athermal AWG specification

0.0/5 rating (0 votes)

Description

100G 40/48-CH Gaussian Athermal AWG

产品形貌/Description
F-tone Networks’s Athermal AWG series products take silica-on-silicon planar technology and it is built with high performance and reliability, which can be used in general DWDM systems. Based on the athermal design and packing, it is totally passive product which does not require any electrical power or temperature control. For 100G AAWG Mux/Demux, it supports up to 48-CH based on a single chipset. Customized wavelengths, package and fiber options are also available.

特点/Features
● 低消耗/Low Insertion Loss
● 宽事情带宽/Wide pass band
● 高通道隔离度/High Channel Isolation
● 高稳固性和可靠性/High Stability and reliability 

应用/Applications
● 波分复用网络/WDM Network
● 电信通讯/Telecommunication
● 接入网/Access Network 

极限条件/Absolute Maximum Ratings

参数/Parameters

条件/Conditions

规格/Specifications

单位/Unit

Min.

Max.

事情温度/Operating Temperature

Device Not Powered on Heater Element

-5

65

℃

事情湿度/Operating Humidity

无冷凝情形/Non-Condensing Environment

5

85

%RH

存储温度/Storage Temperature

Device Not Powered on Heater Element

-40

85

oC

存储湿度/Storage Humidity

无冷凝情形/Non-Condensing Environment

0

95

%RH

 光学性能/Optical Specifications(高斯无热AWG/ Gaussian Athermal AWG)

参数/Parameters

条件/Conditions

规格/Specifications

单位/Unit

Min.

Typ.

Max.

通道数/Number of Channels

40/48

CH

通道距离/Number Channel Spacing

100

GHz

中心波长/Center Wavelength

ITU frequency, measured in vacuum.

C-band

nm

波长精度/Wavelength Stability

Maximum range of the wavelength error  of all channels and temperatures in average polarization.

±0.07

nm

-1dB带宽/-1dB Channel Bandwidth

Clear channel bandwidth defined by passband shape. For each Channel.

0.20

nm

-3dB带宽/-3dB Channel Bandwidth

Clear channel bandwidth defined by passband shape. For each channel.

0.36

nm

ITU波长通道插损/Optical Insertion Loss at ITU grid

Defined as the minimum transmission at ITU wavelength for all channels. For each channel, at all temperatures and polarizations with connectors.

4.5

dB

相邻通道隔离度Adjacent Channel Isolation

Ratio of peak transmission to the maximum transmission over both adjacent ITU wavelengths

25

dB

非相邻通道隔离度

Non-Adjacent, Channel Isolation

Ratio of peak transmission in channel

passband to the maximum transmission over all non-adjacent ITU wavelength

29

dB

插损一致性/Insertion Loss Uniformity

The difference between the maximum and minimum of passband across all channels

1.0

dB

偏向性/Directivity(Mux Only)

Ratio of reflected power out of any channel(other than channel n)to power in from the input channel n

40

dB

回损/Optical Return loss

Input & output ports

40

dB

偏振相关消耗/Polarization Dependent Loss in Clear Channel Band

Worst-case value measured in ± 20GHz around ITU wavelength for each port.

0.5

0.7

dB

偏振模式色散Polarization Mode Dispersion

Maximum differential group delay within reference ITU wavelength

0.5

ps

色度色散/Chromatic Dispersion

Maximum change rate of group delay versus wavelength within reference ITU wavelength

-10

+10

ps/nm

最大输入光功率Maximum Input Optical Power

Maximum continuous optical power

500

mW

机械尺寸, 光纤输出和连讨论设置/Mechanical Dimensions, Fiber Coding and Connector Specifications

尺寸/Dimensions

120 x 70 x 10

mm

光纤类型/Fiber Type

公共端/Common SMF-28e fiber with 900um loose tube/ SMF-28e 加900um松套管

通道端/Channels: SMF-28e Ribbons

光纤长度/Fiber Length

输入端/Common

1000mm ± 50mm with 900um loose tube/输入纤长1000mm ± 50mm 900um套管

输出端/Channels

Ribbon 500mm± 20 mm and Fan out 500mm± 30mm with 900um loose tube

/输出带纤500mm± 20 mm，加分支器纤长500mm± 30mm

公共端/Common

颜色/Color

白/white

带纤标识/Ribbon Identification

带纤最后贴数码贴标识

/Label with ribbon number will be placed close to end-points

毗连器类型/Connector Options

输入端/Common

LC/UPC

输出端/Channels

LC/UPC

带纤光纤标识/Fiber Identification in Ribbon

1

蓝/Blue

2

橙/Orange

3

绿/Green

4

褐/Brown

5

灰/Grey

6

白/White

7

红/Red

8

黑/Black

9

黄/Yellow

10

紫/Purple

11

粉/Pink

12

水/Aqua

 *可按客户要求定制/Customized design available     

4                           

 订购信息/Ordering Information

FT-13-XAWG

X

XX

X

XXX

X

X

X

XX

XX

Type

Band

Number of Channels

Spacing

1st Channel

Chip Type

Package

Fiber Length(Total Length)

In/Out Connector

是否天下产

AAWG=Athermal AWG

C=C-Band
L=L-Band
D=C+L-Band
X=Customize

16=16-CH
32=32-CH
40=40-CH
48=48-CH
96=96-CH
XX=Special

1=100G
2=200G
5=50G
X=Special

C62=C62
H61=H61
C60=C60
H59=H59
XXX=special

G=Gaussian
F=Flat Top

M=Module
R=Rack
X=Special

1=0.5m
2=1m
3=1.5m
4=2m
X=Specify

0=None
1=FC/APC
2=FC/PC
3=SC/APC
4=SC/PC
5=LC/APC
6=LC/PC
7=ST/UPC
X=Specify

GC=天下产
空=非天下产

 Note: Typical channel plan: ITU wavelengths 50G H13(1566.72nm)-C61(1528.77nm).

 

 

 

 

 

注：本产品有天下产化型号可选
本产品为FT-13系列，仅展示部分参数，若有需要，请联系尊龙凯时人生就是搏。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap、网站地图