+86-028-85255257
50G 80/96-CH Gaussian Athermal AWG
²úÆ·ÐÎò/Description
F-tone Networks’s Athermal AWG series products take silica-on-silicon planar technology and it is built with high performance and reliability, which can be used in general DWDM systems. Based on the athermal design and packing, it is totally passive product which does not require any electrical power or temperature control. For 50G AAWG Mux/Demux, it supports up to 96-CH based on a single chipset. Customized wavelengths, package and fiber options are also available.
Ìصã/Features
¡ñ µÍÏûºÄ/Low Insertion Loss
¡ñ ¿íÊÂÇé´ø¿í/Wide pass band
¡ñ ¸ßͨµÀ¸ôÀë¶È/High Channel Isolation
¡ñ ¸ßÎȹÌÐԺͿɿ¿ÐÔ/High Stability and reliability
Ó¦ÓÃ/Applications
¡ñ ²¨·Ö¸´ÓÃÍøÂç/WDM Network
¡ñ µçÐÅͨѶ/Telecommunication
¡ñ ½ÓÈëÍø/Access Network
¼«ÏÞÌõ¼þ/Absolute Maximum Ratings
²ÎÊý/Parameters |
Ìõ¼þ/Conditions |
¹æ¸ñ/Specifications |
µ¥Î»/Unit |
|
Min. |
Max. |
|||
ÊÂÇéζÈ/Operating Temperature |
Device Not Powered on Heater Element |
-5 |
65 |
oC |
ÊÂÇéʪ¶È/Operating Humidity |
ÎÞÀäÄýÇéÐÎ/Non-Condensing Environment |
5 |
85 |
%RH |
´æ´¢Î¶È/Storage Temperature |
Device Not Powered on Heater Element |
-40 |
85 |
oC |
´æ´¢Êª¶È/Storage Humidity |
ÎÞÀäÄýÇéÐÎ/Non-Condensing Environment |
0 |
95 |
%RH |
¹âѧÐÔÄÜ/Optical Specifications(¸ß˹ÎÞÈÈAWG/ Gaussian Athermal AWG)
²ÎÊý/Parameters |
Ìõ¼þ/Conditions |
¹æ¸ñ/Specifications |
µ¥Î»/Unit |
||
Min. |
Typ. |
Max. |
|||
ͨµÀÊý/Number of Channels |
|
80/96 |
CH |
||
ͨµÀ¾àÀë/Number Channel Spacing |
|
50 |
GHz |
||
ÖÐÐIJ¨³¤/Center Wavelength |
ITU frequency, measured in vacuum. |
C-band |
nm |
||
ͨµÀ´ø¿í/Clear Channel Passband |
Centered at each ITU channel frequency |
± 6.25 |
GHz |
||
²¨³¤¾«¶È/Wavelength Stability |
Maximum range of the wavelength error of all channels and temperatures in average polarization. |
±0.09 |
nm |
||
-1dB´ø¿í/-1dB Channel Bandwidth |
Clear channel bandwidth defined by passband shape. For each Channel. |
0.25 |
|
|
nm |
-3dB´ø¿í/-3dB Channel Bandwidth |
Clear channel bandwidth defined by passband shape. For each channel. |
0.30 |
|
|
nm |
ITU²¨³¤Í¨µÀ²åËð/ Optical Insertion Loss at ITU grid |
Defined as the minimum transmission at ITU wavelength for all channels. For each channel, at all temperatures and polarizations with connectors. |
|
|
7.0 |
dB |
ÏàÁÚͨµÀ¸ôÀë¶È Adjacent Channel Isolation |
Ratio of peak transmission to the maximum transmission over both adjacent ITU wavelengths |
20 |
|
|
dB |
·ÇÏàÁÚͨµÀ¸ôÀë¶È Non-Adjacent, Channel Isolation |
Ratio of peak transmission in channel passband to the maximum transmission over all non-adjacent ITU wavelength |
30 |
|
|
dB |
×Ü´®ÈÅ/ Total Crosstalk |
Ratio of power in channel to power in all other ITU wavelength |
17 |
|
|
dB |
²åËðÒ»ÖÂÐÔ/ Insertion Loss Uniformity |
The difference between the maximum and minimum of passband across all channels |
|
|
1.7 |
dB |
Æ«ÏòÐÔ/Directivity(Mux Only) |
Ratio of reflected power out of any channel(other than channel n)to power in from the input channel n |
45 |
|
|
dB |
»ØËð/Optical Return loss |
Input & output ports |
40 |
|
|
dB |
Æ«ÕñÏà¹ØÏûºÄ/ Polarization Dependent Loss in Clear Channel Band |
Worst-case value measured in ± 20GHz around ITU wavelength for each port. |
|
0.3 |
0.5 |
dB |
Æ«Õñģʽɫɢ Polarization Mode Dispersion |
Maximum differential group delay within reference ITU wavelength |
|
|
1.0 |
ps |
É«¶ÈÉ«É¢/Chromatic Dispersion |
Maximum change rate of group delay versus wavelength within reference ITU wavelength |
-35 |
|
+35 |
ps/nm |
×î´óÊäÈë¹â¹¦ÂÊ Maximum Input Optical Power |
Maximum continuous optical power |
|
|
500 |
mW |
»úе³ß´ç, ¹âÏËÊä³öºÍÁ¬ÌÖÂÛÉèÖÃ/Mechanical Dimensions, Fiber Coding and Connector Specifications
³ß´ç/Dimensions |
120 x 70 x 10 |
mm |
|||||||||||||
¹âÏËÀàÐÍ/Fiber Type |
¹«¹²¶Ë/Common SMF-28e fiber with 900um loose tube/ SMF-28e ¼Ó900umËÉÌ×¹Ü Í¨µÀ¶Ë/Channels: SMF-28e Ribbons |
||||||||||||||
¹âÏ˳¤¶È/Fiber Length |
ÊäÈë¶Ë/Common |
1000mm ± 50mm with 900um loose tube/ÊäÈëÏ˳¤1000mm ± 50mm 900umÌ×¹Ü |
|||||||||||||
Êä³ö¶Ë/Channels |
Ribbon 500mm± 20 mm and Fan out 500mm± 30mm with 900um loose tube /Êä³ö´øÏË500mm± 20 mm£¬¼Ó·ÖÖ§Æ÷Ï˳¤500mm± 30mm |
||||||||||||||
¹«¹²¶Ë/Common |
ÑÕÉ«/Color |
°×/white |
|||||||||||||
´øÏ˱êʶ/Ribbon Identification |
´øÏË×îºóÌùÊýÂëÌù±êʶ /Label with ribbon number will be placed close to end-points |
||||||||||||||
ÅþÁ¬Æ÷ÀàÐÍ/Connector Options |
ÊäÈë¶Ë/Common |
LC/UPC |
|||||||||||||
Êä³ö¶Ë/Channels |
LC/UPC |
||||||||||||||
´øÏ˹âÏ˱êʶ/Fiber Identification in Ribbon |
1 |
˦/Blue |
2 |
³È/Orange |
3 |
ÂÌ/Green |
4 |
ºÖ/Brown |
5 |
»Ò/Grey |
6 |
°×/White |
|||
7 |
ºì/Red |
8 |
ºÚ/Black |
9 |
Ȯ/Yellow |
10 |
×Ï/Purple |
11 |
·Û/Pink |
12 |
Ë®/Aqua |
||||
*¿É°´¿Í»§ÒªÇó¶¨ÖÆ/Customized design available
|
¶©¹ºÐÅÏ¢/Ordering Information
FT-13-XAWG |
X |
XX |
X |
XXX |
X |
X |
X |
XX |
XX |
Type |
Band |
Number of Channels |
Spacing |
1st Channel |
Chip Type |
Package |
Fiber Length (Total Length) |
In/Out Connector |
ÊÇ·ñÌìϲú |
AAWG= Athermal AWG |
C=C-Band L=L-Band D=C+L-Band X=Customize |
16=16-CH 32=32-CH 40=40-CH 48=48-CH 96=96-CH XX=Special |
1=100G 2=200G 5=50G X=Special |
C62=C62 H61=H61 C60=C60 H59=H59 . XXX=special |
G=Gaussian F=Flat Top |
M=Module R=Rack X=Special |
1=0.5m 2=1m 3=1.5m 4=2m X=Specify |
0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=LC/APC 6=LC/PC 7=ST/UPC X=Specify |
GC=Ììϲú ¿Õ=·ÇÌìϲú |
Note: Typical channel plan: ITU wavelengths 50G H13(1566.72nm)-C61(1528.77nm).
×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡
±¾²úƷΪFT-13ϵÁУ¬½öչʾ²¿·Ö²ÎÊý£¬ÈôÓÐÐèÒª£¬ÇëÁªÏµ尊龙凯时人生就是搏¡£
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.