• 4 independent full-duplex channels
• Up to 11.2Gbps data rate per channel
• MTP/MPO optical connector
• QSFP+ MSA compliant
• Digital diagnostic capabilities
• Capable of over 100m transmission on OM3 multi-mode ribbon fiber
• CML compatible electrical I/O
• Single +3.3V power supply
• Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
• XLPPI electric interface (with 1.5W Max power)
• RoHS-6 compliant

• Compliant with 40G Ethernet IEEE802.3ba and
• 40GBASE-LR4 Standard
• QSFP+ MSA compliant
• Compliant with QDR/DDR Infiniband data rates
• Up to 11.2Gbps data rate per wavelength
• 4 CWDM lanes MUX/DEMUX design
• Up to 10km transmission
• Operating case temperature: 0~70C
• Maximum 3.5W operation power
• RoHS compliant

• Compliant to InfiniBand, 10Gbps QDR, 5Gbps DDR, 2.5 Gbps SDR
• Aggregate bandwidth of > 40Gbps
• MTP/MPO optical connector
• QSFP+ MSA compliant
• Capable of over 100m transmission on high bandwidth 50um multi-mode ribbon fiber
• Single +3.3V power supply
• Operating case temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
• RoHS compliant

    切合IEEE802.3ah要求
    知足电信要求PX20+/PX20++
    具有切合SFF-8472规范的DDM功效
    光纤接口是单纤SC/LC接口或者带尾纤
    发射端1490nm长发光、1310nmDFP突发模式激光器
    吸收1310nm、1490nm的PIN/APD激光器
    切合ROSH6的标准

• Single fiber bi-directional data links asymmetric TX 2488Mbps / RX1244Mbps application
• 1490nm continuous-mode DFB laser transmitter and 1310nm burst-mode APD-TIA receiver
• Small Form Factor Pluggable package with SC/UPC Connector
• Support Class C+ 17~32dB attenuation range application (With FEC)
• Reset burst-mode receiver design support more than 15dB dynamic range
• 0 to 70°C operating temperature
• Single 3.3V power supply  
• Digital diagnostic monitoring interface
• Digital burst RSSI function to monitor the input optical power level
• LVPECL compatible data input/output interface
• LVTTL transmitter disable control
• LVTTL transmitter laser fault alarm
• LVTTL receiver Signal Detect (SD) indication response within 50ns.
• Low EMI and excellent ESD protection
• Class I laser safety standard IEC-60825 compliant
• RoHS-6 compliance 
  

• Single fiber bi-directional data links TX 10.3125Gbps/ Burst Mode RX10.3125Gbps application
• Single fiber bi-directional data links TX 10.3125Gbps/ Burst Mode RX1.25Gbps application
• Single fiber bi-directional data links TX 1.25Gbps/ Burst Mode RX1.25Gbps application
• 0 to 70°C operating case temperature
• 3.3V,5V power supply
• XFP package with SC Receptacle connector
• Hot-pluggable capability
• High power 1577nm EML DFB LD
• High power 1490nm DFB LD
• High sensitivity 1270nm and 1310nm APD
• Support 20km transmission distance with SMF
• Low EMI and excellent ESD protection
• Digital diagnostic monitor interface
• RoHS compliance for FTCX-OLXG-XX