+86-028-85255257
the PM Manual Variable Optical Attenuator is designed and manufactured to reduce the output optical power, get the power suitable. It is with low insertion loss, high extinction ration, high return loss and low Adjustment Precision,The PM Attenuator is widely apllied at fiber laser ,fier CWDM/DWDM/OADM communication system.
Specifications | ||||
Parameter | Unit | Value | ||
Center Wavelength | nm | 1310 | 1550 | 1064 |
Operating Wavelength Range | nm | ±40 | ±40 | ±20 |
Attenuation Range | dB | 0.6~60 | 0.6~60 | 0.6~60 |
Max.Insertion Loss | dB | 0.6 | 0.6 | 0.6 |
Min.Return Loss | dB | 50 | ||
Fiber Type | - | PM Panda fiber | ||
Adjustment Precision | dB | 0.02 | ||
Max.Polarization Dependent Loss | dB | 0.15 | ||
Max.Power Handling | mW | 500 | ||
Operating Temperature | ¡æ | 0 ~ +70 | ||
Storage Temperature | ¡æ | -40~+85 | ||
Packag Dimensions | mm | 26x18x8 | ||
For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower; | ||||
The default connector key is aligned to slow axis; |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.