+86-028-85255257
F-tone¡¯s Dense Wavelength Division Mux/Demultiplexer Thermal Arrayed Waveguide Grating Modules are designed for use within the C- or L-band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the AWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the AWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. Custom frequency grids, fiber types and connector options are also available.
Key Features
Applications
TAWG Specifications
Parameter |
Unit |
Specifications |
|||
Gaussian |
Flat-Top |
||||
ITU Band |
GHz |
¡À12.5 |
|||
Channel Spacing |
GHz |
100 |
|||
Number of channels |
16,32,40,48 or customize |
||||
Wavelength accuracy |
Max |
nm |
0.05 |
||
Insertion Loss |
Max |
dB |
4.5 |
6.0 |
|
-1dB passband |
Min |
nm |
0.2 |
0.4 |
|
-3dB passband |
Min |
nm |
0.4 |
0.6 |
|
Isolation |
Adjacent Channel |
Min |
dB |
27 |
|
Non-adjacent Channel |
Min |
dB |
35 |
||
Total Crosstalk |
Min |
dB |
23 |
23 |
|
Ripple in Passband |
Max |
dB |
1.0 |
||
Polarization Dependent Loss |
Max |
dB |
0.8 |
||
Directivity |
Min |
dB |
50 |
||
Return Loss |
Min |
dB |
45 |
||
Polarization Mode Dispersion |
Max |
ps |
0.5 |
||
Power Handling |
Max |
mW |
300 |
||
Drive voltage (Heater) |
Type |
V |
5.0 |
||
Drive current (Heater) |
Type |
A |
2.0 |
||
Fiber Type |
Corning SMF-28 / SMF-28e or customize |
||||
Operating Temperature |
¡ãC |
5~70 |
|||
Storage Temperature |
¡ãC |
-40~85 |
|||
Package Dimension |
mm |
(L)135¡Á(W)65¡Á(H)20 |
|||
19¡¯¡¯ Rack mount Package |
mm |
1U, (L)230¡Á(W)440¡Á(H)44 |
Notes£ºSpecifications without fiber connectors
Electrical Specifications
Parameters |
Conditions |
Specifications |
Unit |
||
MIN |
MAX |
||||
Set Point Temperature of Module |
Heater Based Temperature Control |
68 |
85 |
¡ãC |
|
Temperature Sensor |
Thermistor |
RTD |
|||
Temperature Sensor Resistance |
25¡ãC |
10 |
k¦¸ |
||
Heater Power Consumption |
Peak Power Required to Warm Module from 0 ¡ãC to Set Point Temperature with Airflow of 0.1 linear meter per second (22.5 linear ft/min) in the warm-up time . |
8 |
W |
||
Heater Resistance |
3 |
¦¸ |
|||
Module Warm-Up Time |
Time for module to be warmed up from -5oC to the set-point temperature |
10 |
Mins |
||
Pin Assignment |
Pin1 |
Heater or TEC(+) |
|||
Pin2 |
NC |
||||
Pin3 |
NC |
||||
Pin4 |
Thermistor A |
||||
Pin5 |
NC |
||||
Pin6 |
NC |
||||
Pin7 |
Thermistor B |
||||
Pin8 |
NC |
||||
Pin9 |
NC |
||||
Pin10 |
Heater or TEC(-) |
||||