AFCT-89SFDZ

尊龙凯时人生就是搏רҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFCT-89SFDZ,Avago AFCT-89SFDZ,°²»ª¸ßAFCT-89SFDZ¹âÄ

£¿é,Avago AFCT-89SFDZ¹âÄ

£¿é,°²»ª¸ßAFCT-89SFDZ¹âÏËÄ

£¿é,Avago AFCT-89SFDZ¹âÏËÄ

£¿é,°²»ª¸ßAvago AFCT-89SFDZ¹âÄ

£¿é,°²»ª¸ßAvago AFCT-89SFDZ¹âÏËÄ

£¿é£¬100%ÍêÉƼæÈÝ°²»ª¸ßAvago AFCT-89SFDZ¹âÄ

£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

The optical transceiver module (AFCT-89SFDZ) from FIT Optical Interconnect Technology is a four-channel duplex, pluggable, single mode fiber-0ptic QSFP28 Transceiver for 100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range, single mode fiber interconnect applications. It integrates four electrical data lanes in each direction into transmission over a duplex LC single mode fiber optic cable. Each electrical lane operates at 25.78125GBd and conforms to the 100GE CAUI-4 electrical interface.

These modules are targeted at low cost 2km SMF data center links per 100G Lambda MSA. These modules are designed to operate over single mode fiber systems using a single 1310nm 100Gbps source. The electrical interface uses a 38 contact QSFP28 edge type connector. The optical interface uses a conventional LC duplex optical connector. This module incorporates FIT Optical Interconnect Technology proven integrated circuit and EML technology to provide reliable long life, high performance, and consistent service.

Features

• Compliant to IEEE 100GbE electrical specification 802.3 Annex 83E for CAUI-4 interfaces (no host FEC is required)
• Compliant to 100G Lambda MSA
• 100G link distances up to 2km SMF
• QSFP28 MSA specification compliant
• Class 1 eye safety 
• Pull tab for ease of transceiver insertion and extraction
• 0ºC to 70ºC case temperature operating range
• Service life: 10 years
• Proven high reliability technology: cooled eml transmitter and pin detector
• Hot pluggable QSFP28 transceiver for ease of installation and servicing
• Two Wire Serial (TWS) interface with Digital Monitoring and Maskable Interrupts for Expanded Functionality

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.