The ACPL-P341/ACPL-W341 gate drive optocoupler contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This gate drive optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.
The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and high peak output current supplied by this optocoupler make it ideally suited for direct driving IGBT with gate drives rated up to 1200V/100A.
For IGBTs with higher ratings, the ACPL-P341/ACPL-W341 gate drive optocoupler can be used to drive a discrete power stage which drives the IGBT gate. The ACPL-P341 and ACPL-W341 have the highest insulation voltage of VIORM = 891Vpeak and 1140Vpeak respectively in the IEC/ EN/DIN EN 60747-5-2.

Features
¡ñ 3.0 A maximum peak output current
¡ñ 2.5 A minimum peak output current
¡ñ Rail-to-rail output voltage
¡ñ 200 ns maximum propagation delay
¡ñ 100 ns maximum propagation delay difference
¡ñ LED current input with hysteresis
¡ñ ICC = 3.0 mA maximum supply current to allow bootstrap power supply
      Under Voltage Lock-Out (UVLO) protection with hysteresis
¡ñ 35 kV/μs Minimum Common Mode Rejection (CMR) at
      VCM = 1500 V
¡ñ Wide operating VCC range: 15 to 30 V
¡ñ Industrial temperature range: -40°C to 105°C
¡ñ Safety Approval:
      UL Recognized 3750/5000 VRMS for 1min.
      CSA
      IEC/EN/DIN EN 60747-5-2 VIORM = 891/1140 Vpeak
¡ñ Options available are:
      060E = IEC/EN/DIN EN 60747-5-2
      500E = Tape and Reel Packaging Option
      XXXE = Lead Free Option

Applications
¡ñ IGBT/MOSFET gate drive
¡ñ AC/Brushless DC motor drives
¡ñ Renewable energy inverters
¡ñ Industrial inverters
¡ñ Switching Power Supplies (SPS)

ÆäËûÉÐÓдó×Ú¿ÉÌæ»»avago finisar ....µÈµÈÆ·ÅƵIJúÆ·
£¬ÇëÁªÏµ尊龙凯时人生就是搏µÄÊг¡Ö°Ô±

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.