The ACPL-C87B/C87A/C870 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1GΩ input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems. In a typical voltage sensing implementation, a resistive voltage divider is used to scale the DC-link voltage to suit the input range of the voltage sensor. A differential output voltage that is proportional to the input voltage is created on the other side of the optical isolation barrier.

For general applications, the ACPL-C87A (±1% gain tolerance) and the ACPL-C870 (±3% gain tolerance) are recommended. For high precision requirements, the ACPL-C87B (±0.5% gain tolerance) can be used. The ACPL-C87B/C87A/C870 optical isolation amplifiers family operates from a single 5V supply and provides excellent linearity. An active-high shutdown pin is available which reduces the Idd1 current to only 15 uA, making them suitable for battery-powered and other power-sensitive applications.

The high common-mode transient immunity (15kV/us) of the ACPL-C87B/C87A/C870 provides the precision and stability needed to accurately monitor DC-link voltage in high noise environments. Combined with superior optical coupling technology, the ACPL-C87B/C87A/C870 implements sigma-delta modulation, chopper stabilized amplifiers, and differential outputs to provide unequaled isolation-mode noise rejection, low offset, high gain accuracy and stability. This performance is delivered in a compact, auto-insertable Stretched SO-8 (SSO-8) package that meets worldwide regulatory safety standards.

Features
¡ñ 0.5% High Gain Accuracy (ACPL-C87B only)
¡ñ Unity Gain 1V/V
¡ñ -35 ppm/°C Low Gain Drift
¡ñ -0.3 mV Input Offset Voltage
¡ñ 0.1% Excellent Non-Linearity Max
¡ñ Active High Shutdown Pin
¡ñ 100 kHz Wide Bandwidth
¡ñ 3 V to 5.5 V Wide Supply Range for Output Side
¡ñ –40°C to +105°C Operating Temperature Range
¡ñ Advanced Sigma-Delta A/D Modulation Technology
¡ñ 15 kV/µs Common-Mode Transient Immunity
¡ñ Compact, Auto-Insertable Stretched SO-8 Package
¡ñ Safety and Regulatory Approvals (pending):
       IEC/EN/DIN EN 60747-5-5: 1230 Vpeak working insulation voltage
       UL 1577: 5000 Vrms/1min double protection rating
       CSA: Component Acceptance Notice #5

Applications
¡ñ Isolated Voltage Sensing in AC and Servo Motor Drives
¡ñ Isolated DC-Bus Voltage Sensing in Solar Inverters,
¡ñ Wind Turbine Inverters
¡ñ Isolated Sensor Interfaces
¡ñ Signal Isolation in Data Acquisition Systems
¡ñ General Purpose Voltage Isolation

ÆäËûÉÐÓдó×Ú¿ÉÌæ»»avago finisar ....µÈµÈÆ·ÅƵIJúÆ·£¬ÇëÁªÏµ尊龙凯时人生就是搏µÄÊг¡Ö°Ô±

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.