The photoreceiver module FT-RV2022(A) is a single ended front-end with a high gain of typically 500 V/W and a bandwidth of 33 GHz. The photoreceiver module FT-RV2022(A) contains a waveguide-integrated PIN-photodiode (PD) and a transimpedance amplifier (TIA) with limiting output buffer. An integrated feedback loop optimizes the performance in the frequency and/or time domain with respect to different optical input power. Due to the limiting output buffer the output voltage swing is limited to approx. 400 msV. Incorporated blocking capacitors enable AC output coupling.

The FT-DV2120 is a compact module that is based on a modified uni-travelling carrier (MUTC) photodetector chip. The FT-DV2120 is not matched to 50Ω. For applying a bias voltage of -6V, an external bias-Tee is required. It has a responsivity of 0.55 A/W (1550 nm) and a high saturation photocurrent of 150 mA @ 10 GHz. The Ultra-high power PD is capable of delivering ≥ 22 dBm RF output power @ 10 GHz. The device exhibits a high linearity with typical OIP3 values above 30 dBm at a frequency of 10 GHz.

The FT-D3180-103 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 2.5Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multi-mode fiber.