QSFP-DD transceiver modules are designed for use in 400 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP-DD MSA, QSFP28 MSA, IEEE 802.3cu and portions of IEEE P802.3bm. Digital diagnostic functions are available via the I2C interface, as specified by the QSFP28 MSA and Finisar Application Note AN-20xx5. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

Features
¡ñ Hot-pluggable QSFP-DD type 2 form factor
¡ñ Supports 425Gb/s aggregate bit rate
¡ñ 10 km over parallel SMF
¡ñ Power dissipation <10W (limited temp) or < 12W (c-temp)
¡ñ RoHS-6 compliant
¡ñ Case temperature range of 20°C to +60°C (limited temp) or 0°C to +70°C (c-temp)
¡ñ Single 3.3V power supply
¡ñ 4x100Gb/s PAM4 serial lanes
¡ñ 8x50G PAM4 retimed electrical interface
¡ñ Parallel MPO receptacle
¡ñ I2C management interface

Applications
¡ñ 4x100G-LR applications with FEC
¡ñ 100GbE breakout applications

×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.