+86-028-85255257
F-tone's SFP-10G-MSR 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The SFP-10G-MSR is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module. his product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and F-tone Application Note AN-2038.
Key Features
Hot-pluggable SFP+ footprint
Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0¡ãC to 70¡ãC/-40¡ãC to 85¡ãC
Single 3.3Vpower supply
Maximum link length of 300m on 2000 MHZ-km MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Applications
1000BASE-SX 1G Ethernet
10GBASE-SR/SW 10G Ethernet
Specifications
Form Factor SFP+
Distance 300 m
Protocol Optical Gigabit Ethernet Compliant
10 Gigabit Ethernet Compliant
Data Rate (max) 10.3 Gb/s
Low End Case Temperature 0¡ãC to 70¡ãC/-40¡ãC to 85¡ãC
High End Case Temperature 0¡ãC to 70¡ãC/-40¡ãC to 85¡ãC
Diagnostics Digital
Transmitter VCSEL
Receiver PIN
Voltage Supply 3.3
Connector LC