+86-028-85255257
FLAF-1300-02X series of transceiver modules are the perfect solution for Low-speed communication networks. FLAF-1300-02X Small Form Factor (SFF) transceivers comply with the 2¡Á5 standard package defined by the Small Form Factor Multi-Sourcing Agreement (MSA). The transceivers are RoHS compliant and lead-free per Directive 2002/95/EC5. FLAF-1300-02X SFF transceivers support data rates up to 10Mbps.FLAF-1300-02X SFF module has been designed to provide good immunity to RF electromagnetic fields and excellent EMC/EMI performance.
Standard : 0 to +70¡ãC
Industrial : -40 to +85¡ãC
Operating of SFF beyond the Absolute Conditions Listed in Table 1 will degrade or damage the products. It¡¯s not implied that the products would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
Parameter |
Symbol |
Min |
Max |
Units |
Storage Temperature |
TST |
-40 |
+85 |
¡æ |
Relative Humidity |
RH |
5 |
95 |
% |
Supply Voltage |
VCC |
0 |
+3.8 |
V |
Table 2-- Recommended Operating Environment
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Supply Voltage |
VCC |
+3.1 |
+3.3 |
+3.5 |
V |
|
Supply Current |
ITX+IRX |
- |
100 |
150 |
mA |
|
Operating Temperature |
Commerce level |
TOP |
0 |
- |
+70 |
¡æ |
Data Rate |
B |
- |
- |
10 |
Mbits/s |
Table 3 FTAF-1503-120X-9105M Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC= 3.1V to 3.5V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
- |
10 |
Mb/s |
Output Center Wavelength |
¦ËC |
1260 |
1310 |
1360 |
nm |
Output Spectral width (RMS) |
¦Ë |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-10 |
- |
-3 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
S |
- |
- |
-16 |
dBm |
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
Operation Center Wavelength |
¦ËC |
1100 |
1600 |
nm |
|
LOSS Detect Deassert Level |
LOSD |
- |
- |
-16 |
dBm |
LOSS Detect Assert Level |
LOSA |
-25 |
- |
- |
dBm |
Signal Detect Hysteresis |
PH |
0.5 |
- |
4.0 |
dB |
Table 4 (Ambient Operating Temperature Ta=25¡ãC, V CC = 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Supply Voltage |
VCC |
3.1 |
3.3 |
3.5 |
V |
Transmitter |
|||||
TX_DISABLE Input High |
VHI |
2.0 |
- |
- |
V |
TX_DISABLE Input Low |
VIL |
- |
- |
0.8 |
V |
TX_FAULT Output Low |
- |
- |
- |
0.4 |
V |
Receiver |
|||||
Output Resistance |
ROUT |
42 |
50 |
58 |
W |
LOS Output Low Voltage |
VOL |
2.0 |
- |
- |
V |
LOS Output High Voltage |
VOH |
- |
- |
0.8 |
V |
Table 5£SFF to host connector pin assignment
Pin # |
Pin Name |
Description |
1 |
VEER |
Receiver Ground |
2 |
VCCR |
Receiver Power Supply |
3 |
SD |
Signal Detect. Logic 1 indicates normal operation or Logic 0 indicates normal operation. |
4 |
NC |
NC |
5 |
RD+ |
Receiver Data Out. AC Coupled |
6 |
VCCT |
Transmitter Power Supply |
7 |
VEET |
Transmitter Ground |
8 |
TDIS |
Transmitter Disable |
9 |
TD+ |
Transmitter Data in. AC Coupled. |
10 |
NC |
NC |
Ordering information
Part number |
Operating Case temperature |
FLAF-1300-02 |
SFF, DC 0~10M, MMF, 1310(FP) 2KM, 0 to +70¡ãC |
FLAF-1300-02I |
SFF, DC 0~10M, MM F, 1310(FP) 2KM, -40 to +85¡ãC |
Note: Specifications subject to change without notice.