+86-028-85255257
Product Description
10GFC-SFP-300 is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 4.6 dB, with in most cases is enough to reach about 300 m (OM2), 33 m /82 m (OM1) distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality VSCEL Laser transmitter with operating at nominal wavelength 850 nm and 850 nm PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10GFC-SFP-300 operates in Standard 0°-70°C temperature range and has Double LC interface. SFP+ support 1.0625-10.52 Gbps data rate and such applications as 10G Fiber Channel (10.52 Gbps)|8G Fiber Channel (8.5 Gbps)|4G Fiber Channel (4.25 Gbps)|2G Fiber Channel (2.125 Gbps)|1G Fiber Channel (1.0625 Gbps). 10GFC-SFP-300 SFP+ Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Storage Area Networking SAN Applications in Data Centers, Data Center Fiber Channel Interconnections over Backbone, Enterprise Networks SAN Interconnections and other optical links.
Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 10GFC-SFP-300 SFP+ Transceiver is fully compliant to SFP+ Multi Source Agreement SFF-8431. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules.
Media Type: |
Multi-Mode Fiber (MMF) |
---|---|
TX Wavelength: |
850 nm. |
RX Wavelenght: |
850 nm. |
Minimum Optical Budget: |
4.6 dB |
Maximum Distance: |
300m |
Supported Data Rate: |
1.0625-10.52 Gbps |
Supported Applications: |
10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber Channel (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps) |
DDM/DOM: |
Support |
Temperature Range: |
Standard 0°-70°C |
Connectors: |
Double LC |
Tx Wavelength Bandwidth: |
20 nm (840-860 nm) |
Rx Wavelength Bandwidth: |
20 nm (840-860 nm) |
Minimum Transmitting Power: |
-6.5 dB |
Maximum Transmitting Power: |
1 dB |
Receiver Sensitivity: |
-11.1 dBm |
Receiver Overload: |
-1 dBm |
Dispersion: |
110 ps/nm |
Transmitter Type: |
VSCEL Laser |
Receiver Type: |
PIN photodiode |
Power: |
+3.3V single power supply |
Chipset: |
MAXIM, MINDSPEED, SEMTECH |
Compliance: |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.