尊龙凯时人生就是搏

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

100GBASE QSFP28 CWDM4 10KM Optical Transceiver Module

100GBASE QSFP28 CWDM4 10KM Optical Transceiver Module

0.0/5 rating (0 votes)

Description

100GBASE QSFP28 CWDM4 10KM Optical Transceiver Module

Features

¨ 4 channels full-duplex transceiver modules

¨ Transmission data rate up to 26Gbps per channel      

¨ 4 x26Gb/s DFB-based CWDM uncooled transmitter

¨ 4 channels PIN ROSA

¨ Internal CDR circuits on both receiver and transmitter channels

¨ Non airtight optical engine design

¨ Qualified under temperature 85°Cand humidity 85% @500 hours (the variation of TX2.5 dBm, RX1.5 dBm)

¨ Low power consumption <3.5W

¨ Hot Pluggable QSFP form factor

¨ Up to reach 10km for G.652 SMF[with KR4 FEC]

¨ Duplex LC receptacles

¨ Built-in digital diagnostic functions

¨ 3.3V power supply voltage

¨ RoHS 6 compliant(lead free)

¨ Case operating temperature

          Commercial:0 ~ +70¡æ

         Industrial:-40 ~ +85¡æ

Applications

¨  Data Center Interconnect.

¨ 100G 4WDM-10 10km reach.

¨ 100G CWDM4 applications.

¨ Infiniband EDR interconnects.

¨ Enterprise networking

Description

Thisproductisa 100Gb/stransceiver module designed for optical communicationapplications 

compliant with the QSFP MSA,CWDM4 MSA,100G 4WDM4-10 MSA and portions of IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data.

The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in CWDM4 MSA and 4WDM4-10 MSA. The high performance Uncooled CWDM DFB transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 10kmlinks .

The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.

 

Ordering information

Part Number

Product Description

FTQ2-HG-CWDM4-10

100GE, QSFP28, 100GBASE CWDM4  10km,0ºC ~ +70ºC

FTQ2-HG-CWDM4-10I

100GE, QSFP28, 100GBASE CWDM4  10km,-40ºC ~ +85ºC

 

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ