+86-028-85255257
Product Description
100G-QSFP28-80 is Multi-Vendor MSA Compatible 100GBASE-ZR4 QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver, operating over pair of single-mode optical fiber with four independent optical communication lanes, separated from each other using LAN WDM technology. Module has minimum guaranteed optical budget of 27 dB (with host FEC), which in most cases is enough to reach 80km distance (with host FEC) and 40km distance (without host FEC) using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G-QSFP28-80 uses EML cooled 4x25Gb/s LAN WDM TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) laser transmitters and 4x25Gb/s SOA+PIN receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Additionally module supports KR4 FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link. 100G-QSFP28-80 operates in Standard 0°-70°C temperature range and has double LC connectors. 100GBASE-ZR4 QSFP28 support up to 103.125 Gbps data rate and such applications as 100G Ethernet (103.125 Gbps). 100G-QSFP28-80 optical transceiver is multi-purpose module used in number of different places in today’s networking environment. Most popular applications are Internet Service Provider (ISP) Fiber to the Home Aggregation and Backbone, Mobile Operator Core Networks and Mobile Backhaul and Data Center networking site interconnections.
Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 100G-QSFP28-80 Transceiver is fully compliant to QSFP28 Multi Source Agreement (MSA) and IEEE 802.3ba 100GBASE-ZR4. Consequently compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules.
Media Type: |
Single-Mode Fiber (SMF) |
---|---|
Connectors: |
Double LC |
TX Wavelength: |
LAN WDM 1310nm |
RX Wavelenght: |
LAN WDM 1310nm |
Minimum Optical Budget: |
27dB (with host FEC) |
Maximum Distance: |
80km |
Supported Data Rate: |
103.125 Gbps |
Supported Applications: |
100G Ethernet (103.125Gbps) |
DDM/DOM: |
Supported |
CDR (Clock and Data Recovery) chip |
Supported |
Forward Error Correction (FEC): |
Host FEC Supported |
Transmitter Type: |
EML LAN WDM TOSA |
Tx Wavelength Bandwidth: |
4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Launch Power (Min) Each Lane: |
-2 dBm |
Average Launch Power (Max) Each Lane: |
6.5 dBm |
Extinction Ratio (Min): |
6 dB |
Receiver Type: |
SOA+PIN |
Rx Wavelength Bandwidth: |
4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Receiver Sensitivity (Min) Each Lane: |
-28 dBm |
Average Receiver Sensitivity (Max) Each Lane: |
-7 dBm |
Receiver Overload: |
5.5 dBm |
Temperature Range: |
Standard 0°-70°C |
Storage Temperature: |
-40° to 85°C |
Relative Humidity: |
0 to 85% |
Power Consumption: |
≤6.5W |
Power: |
+3.3V |
Chipset: |
Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV |
Compliance: |
Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE 802.3ba 100GBASE-ZR4, CE, QSFP28 MSA, RoHS, SFF-8636, SFF-8665 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.