尊龙凯时人生就是搏

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

100G-QSFP28-10RX

100G-QSFP28-10RX

0.0/5 rating (0 votes)

Description

Product Description

100G-QSFP28-10RX is Multi-Vendor MSA Compatible 100GBASE-LR4 Rx Only QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver. As global online traffic is asymmetrical – especially this statement is valid nowadays when biggest share of global traffic is video streaming, there is much more downlink traffic then uplink. To address this challenge and help engineers design networks more cost efficiently 100GBASE-LR4 Rx Only comes in play. 100GBASE-LR4 Rx Only doesn’t have 4x25Gb/s TOSA transmitters, it only has 4x25Gb/s PIN ROSA receivers comparing to classical 100GBASE-LR4 module which has both components – 4x25Gb/s TOSA transmitters and 4x25Gb/s PIN ROSA receivers. With help of that 100GBASE-LR4 Rx Only becomes cost efficient alternative comparing to classical 100GBASE-LR4 and can be used in network scenario in combination with 100GBASE-LR4 to make most optimal 100G connections according to real requirements for downlink and uplink in your network. Module operates over one single-mode optical fiber where it receives four independent optical communication lanes, separated from each other using LAN WDM technology. Module has guaranteed average receiver sensitivity for each lane: -10.6 dBm, which in most cases is enough to receive signal from 10 km distance using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 100G-QSFP28-10RX operates in Standard 0°-70°C temperature range and has single LC connector. 100GBASE-LR4 Rx Only QSFP28 support up to 103.125-112.2 Gbps data rate and such applications as 100G Ethernet (103.125Gbps), Optical Transport Network OTU4 4l1-9D1F (112 Gbps) and 128G Fiber Channel (112.2 Gbps). 100G-QSFP28-10RX optical transceiver is multi-purpose module used in number of different places in today’s networking environment. Most popular applications are Internet Service Provider (ISP), Mobile Operator and Data Center Backbone and Core networks to address traffic asymmetry challenge, and as well can be used in networking scenarios where Deep Packet Inspection (DPI) is performed.

Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

Connectors:

Single LC

TX Wavelength:

na

RX Wavelenght:

LAN WDM 1310nm

Minimum Optical Budget:

Average Receiver Sensitivity (Min) Each Lane: -10.6 dBm

Maximum Distance:

10km

Supported Data Rate:

103.125-112.2 Gbps

Supported Applications:

100G Ethernet (103.125Gbps), 4x 32G Fiber Channel (112.2Gbps), OTU4 4l1-9D1F (112 Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Not Supported

Transmitter Type:

N/A

Tx Wavelength Bandwidth:

N/A

Average Launch Power (Min) Each Lane:

N/A

Average Launch Power (Max) Each Lane:

N/A

Extinction Ratio (Min):

N/A

Receiver Type:

PIN ROSA

Rx Wavelength Bandwidth:

4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm)

Average Receiver Sensitivity (Min) Each Lane:

-10.6 dBm

Average Receiver Sensitivity (Max) Each Lane:

4.5 dBm

Receiver Overload:

5.5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤1.5W

Power:

+3.3V

Chipset:

Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV

Compliance:

128GFC Gen 6, Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE 802.3ba 100GBASE-LR4, OTN OTU4 4l1-9D1F, RoHS-6, CE, QSFP28 MSA, SFF-8636, SFF-8665

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ