尊龙凯时人生就是搏

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

100G/200G/400G CFP2 DCO

100G/200G/400G CFP2 DCO

0.0/5 rating (0 votes)

Description

F-tone Networks CFP2 DCO product family is designed based on dual polarization quadrature phase shift keying (DP-QPSK) or dual polarization quadrature amplitude modulation (DP-8QAM /DP-16QAM) or probabilistic constellation shaping quadrature amplitude modulation (PCS-16QAM), supporting extended C-band, polarization diversity coherent detection and advanced electronic link equalization. The product family supports 100/200/400Gbps transmission speeds in an industry-standard, pluggable CFP2 form factor with 7nm DSP and can be widely used in metro carrier, access and Cloud/DCI applications.

Features
1. Support Flex-grid channel spacing DWDM infrastructure
2. Support Flexible client-side interfaces: 100/200/400GbE, OTU4, OTUC1/ OTUC2/ OTUC4 and FlexO
3. Support two line-side FEC types for 100G application:
1) SCFEC/GFEC: 32G Baud DP-QPSK with Interoperable staircase FEC (SCFEC)/ OTU4 frames with G.709 FEC (GFEC)
2) OpenROADM: 31.57G (at DP- QPSK) Baud OpenROADM with oFEC
4. Support three line-side FEC types for 200G application:
1) OpenROADM: 63.1G (at DP-QPSK) OpenROADM with oFEC
2) OpenROADM: 31.57G (at DP-16QAM/DP-8QAM) Baud OpenROADM with oFEC
3) SDFEC: 33G (at PCS-16QAM/PCS-8QAM) Baud SDFEC with probabilistic constellation shaping
5. Support four line-side FEC types for 400G application:
1) 400GZR: 60G Baud OIF 400GZR with CFEC
2) OpenZR+: 60G Baud using ZR framer with oFEC
3) OpenROADM: 63G Baud OpenROADM with oFEC
4) SDFEC: 66G Baud SDFEC with probabilistic constellation shaping
6. Framed PRBS generator/checker on the host and network side interfaces
7. Network and client loopback at the near-endian and far-endian point for incoming and outgoing traffic
8. Standard CFP2 form factor module outline (106 x 41.5 x 12.4 mm)

Applications
1. Access
2. Cloud/DCI
3. Metro

Compliance
1. RoHS compliant
2. CFP MSA IEEE802.3 Clause 45 MDIO
3. 104-pin CFP2 MSA-compliant connector
4. Compliant to OIF-CFP2-DCO-01.0

P/NProduct DescriptionClient SideLine Side Modulation FormatLine Side FEC modeTypical OSNR Sen (dB)TX_Min (dBm)TX_Max (dBm)RX_Min (dBm)RX_Max (dBm)Power Consumption (W)ReachTemperature
(deg C)
FT-CTS100SMRTA00 100G CFP2 DCO,C Band,50GHz Grid,191.15-196.1GHz OTU4 / 100GE DP-QPSK HDFEC / OFEC 15 / 11 -10 5 -24 5 19 MR 0~70
FT-CTS200SMRTA00 200G CFP2 DCO,C Band,50GHz Grid,191.15-196.1GHz OTU4/ OTUC1 / 100GE / OTUC2 / 200GE DP-QPSK /DP-8QAM /PCS-16QAM OFEC / SDFEC 14 / 16 / 18 -10 5 -20 5 22 MR 0~70
FT-CTS400SMRTA00 400G CFP2 DCO,C Band,75GHz Grid,191.15-196.1GHz OTU4 / OTUC1 / OTUC2 / OTUC4/100GE / 200GE / 400GE DP-16QAM /PCS-16QAM CFEC / OFEC 23 / 21 -10 5 -20 5 24 MR 0~70

 

 

 

 

 

×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ